
Using the client's 'Bill of Materials' or Components Database, Enventure
supplies compliance information by consolidating material declarations &
certificates of compliance from the component manufacturers. In this way
Enventure bridges the gap between the component supplier and the client.
The component buyer at the OEM or EMS or the distributor often does not have the
time to do the data collection, since the data is not always easily available
Some component manufacturers have hazmat data available in a structured format
and the information is readily available; but many of the component
manufacturers have limited or no data available and provide the information only
on request from a buyer/customer.
Using Enventure to outsource the data collection provides a fast and effective
way for companies to obtain the necessary data without tying up valuable
resources. Enventure provide a 'pay as you use' service so costs are kept low.
Enventure provides certain standard service packages for RoHS compliance. These
are highly customisable, to add of remove any parameters, based on the
customer's priorities.
The different service levels and the details of what each level provides are
listed below:
Enventure's RoHS Compliance Solutions
Enventure offers three different levels of RoHS analysis - RoHS Basic, RoHS Plus
and Green Basic. The data collection, aggregation and presentation is done as
per the approved EU templates. Enventure can also do data gathering according to
the recently released IPC 1752 material declaration standards.
RoHS BASIC
This service is designed to meet the immediate needs of Designers/ Component
Engineers as well as in preliminary assessment of extent of RoHS compliance of a
BoM.
RoHS Yes/ No status
RoHS compliant alternate from the same manufacturer, if input Part number is not
RoHS compliant
Indicate Part Number change and availability date if known.
RoHS PLUS
This service is designed to take care of basic documentation requirements of
RoHS and is needed in the medium term to fully comply with RoHS, particularly
where customers are located in Europe.
Same as 'RoHS Basic' plus the presence above threshold Yes/No, Mass, PPM and
application/location
note for each of the 6 RoHS banned substances
GREEN BASIC
This service is intended to generally meet WEEE regulations in terms of
'materials/substances of interest' (recycling), and exceed RoHS in terms of
other Hazardous substances.
Same as 'RoHS Plus' plus collecting material declaration as per EIA/JIG formats
- level A & B materials
Other service levels can be custom developed, based on the parameters required
and the template in which the client would like the data collected.